RCBS Stuck Case Remover

Product Description

RCBS Stuck Case Remover

Extracts stuck cases from standard sizer dies without damaging the die using a very simple two step removal process. Includes tap, drill bit, allen screw, allen wrench and remover. Will work with any brand of die. Technical Information Instructions for use:

• Unscrew the expander decapping rod until the decapping pin is free of the primer flash hole in the stuck case. Secure the reloading die in a vice and drill the case head with the included drill bit. Drill straight through the primer pocket and the primer flash hole. Next tap the case head the included 1/4″-20 tap. Place the stuck case remover body onto the case head and turn the cap screw with the allen-type wrench until the case is pulled from the die. Discard the case and reassemble the die.

Manufacturer: RCBS Manufacturer Item Number: RCB9340